User's Manual

Camera Connection
1
1
2
2
LCD Monitor Connection
NI
rewopgnihctiwsnogulpnehtNICDs’aremacotelbacrewoptcennoC
.teltuollawotretpadaylppus
.aremacehtNOnrutotec
no]nottuBrewoP[P
gniggulpybyllacitamotuastratsssecorpgnigrahcyrettabmuihtiLni-tliuB
Only use 5V/1A power adaptor provided in the package.
llufyrettabegrahce
saelp,yticapacllufevahoT.ylppusrewopgnihctiwsni
.ffoseog]rotacidnIyrettaB[neerglitnu
1
2
1
1
2
3
2
Only use 5V/1A power adaptor provided in the package.
egrahcotretpadarewopnigniggulp,derpusthgil]rotacidnIyrettaB[nehW
.yrettab
rewopstinostigulpnehtNICDs’r
evieceRotelbacrewoptcennoC
.teltuollawotretpada
.reviecerehtNOnrutot]nottuBrewoP[sserP
gniggulpybyllacit
amotuastratsssecorpgnigrahcyrettabmuihtiLni-tliuB
yrettabegrahcesaelp,yticapacllufevahoT.ylppusrewopgn
ihctiwsni
.esuelbatroprofregrahctuohtiwreviecerehtgnitarepoerofeb
DC IN 5V/1A
ush
VOX Sensitivity
VOX Activate Recording
Brightness
11
OFF --VOX funtion will be disabled.
level 3 means high sensitivity,level 1 means low sensitivity
Use / to adjust VOX sensitivity level.
System will auto record for 30 sec once camera is triggered by voice when
set “VOX activate recording” to ON.
Please set VOX sensitivity to level 1~3 before proceed with this function.
Press to enter camera brightness adjustment bar, press / to
adjust brightness of current channel.
and Installation
360
Screw the camera onto the bracket
Adjust camera to the proper view angle. Make sure the lens is upright
relative to your subject. Tighten the nut. Adjust the antenna to an
upright position.
Select the position for the camera and secure the camera stand.
Screws and anchors are supplied. Use an appropriate screw type
for the mounting surface.