Instruction Manual

VOX mode allows your Monitor to go into standby which conserves battery

power. While in VOX mode your Monitor will stop transmitting audio and video.

However, whenever the Camera picks up noise (like your baby or anything else)

in the room, the Monitor will automatically begin transmitting video and sound.

Once the room is quiet again the Monitor with return to the power-saving VOX

mode unless you have switched off the VOX feature.

VOX Sensitivity Adjustment

You can adjust the VOX noise sensitivity

to a desired level. Press Menu and use

the“+”and“-”ButtonsandselectVOX

Sense (Fig. 12).

Next press the Menu Button again to

select that operation and then use the

“+”and“-”Buttonsagaintoadjustthe

sensitivity to the desired level (Fig. 13)

...Lo, Med, or Hi sensitivity to noise.

Press the Menu button once more to

select that sensitivity level and return to

the three operation choices.

Exiting Menu

To get back to the normal screen (with

only the Signal and Battery Strength

symbols) from the three operation choice

screen, usethe“+”and“-”Buttonsto

scroll to Menu Exit (Fig. 14) and press

the Menu Button again.