User's Manual

PLAYING MUSIC VIA AUX IN MODE
1. Make sure the Cube speaker is charged
2. Turn the Cube speaker on by pressing the power button at the bottom of the speaker.
A green LED will appear when on.
3. Connect one end of the 3.5 mm audio cable to the “AUX IN” port on the bottom of the
unit. Connect the other end to the 3.5mm headphone jack of your audio device.
Note: Connecting the audio cable will override Bluetooth mode. Cube will automatically
switch to auxillary when the audio cable is connected.
4. Make sure the volume of your audio device is set to medium/low.
5.
TROUBLE SHOOTING
Problem: Bluetooth not connecting.
Solution: Please consult the User Guide of your Bluetooth enabled audio device
for instructions. Make sure that both of your audio device and XBass speaker are
discoverable and charged. Try rebooting the speaker by turning it off then back
on. Make sure someone else is not already connected to the speaker.