User's Manual
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu
from Main Menu ... ... to These Screens ... ... to Do This ...
Language
Language
Language
Language
Language
Language
14 15
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu
from Main Menu ... ... to These Screens ... ... to Do This ...
From the Monitor Setting list...
touch Language
touch one of the 6 specic Languages
you want the monitor to show in all
text displays
From the Monitor Setting list...
touch Factory Default
choose OK to reset all settings, or
Cancel if you change your mind
From the Monitor Setting list...
touch About & Version
here you will see the product name
and manufacturer, and the latest
version of the installed rmware
From the Camera Setting screen...
touch Temperature/Alarm
set
º
F or
º
C (default is ºF)
touch the thermometer icon
set the maximum and minimum
alarm temperature range
set the Alarm to be On or O
if On, set the Alarm Time (from 5 to
60 seconds)
NOTE: When the room temperature
(where the camera is) goes above or
below the temperature range you
set, the monitor will sound an alarm
and the small Temperature icon on
the monitor screen will ash showing
the out-of-range temperature in that
room. The ESC Button will temp-
orarily silence the repeating alarm
until the temperature returns to the
set range, or you turn the Alarm O
from this screen.
From the Camera Setting list...
touch Tx Power/Volume
adjust the Camera Speaker Volume
(top icon) up or down for the Two-
Way Talk function
set the Transmit Range Power
(lower icon) on High or Low
Monitor Setting (cont.)
English
English
French
French
German
German
Portuguese
Portuguese
Spanish
Spanish
Italian
Italian
Language
Language
Language
Language
From the Monitor Setting list...
NOTE: Though shown here for refer-
ence, this function to be used ONLY
for Updating System Firmware, to
be downloaded and put onto an SD
card, in order to be installed using this
option. Specic instructions will be
provided to registered users regarding
any new rmware.
SETTINGS (cont.)
SETTINGS (cont.)
Camera Settings
on the Setting Screen, simply touch
the Camera icon (on the bottom
line) for the one you wish to control
the settings for...
NOTE: Only Paired camera icons
will show in color and be active
for touch control.
HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.