User's Manual

18
19
FACTORY DEFAULT SETTINGS
Item Default value Range
Monitor setting value
Volume 5 0-9
Contrast 5 0-9
Brightness
5 0-9
Date & Time
2011/09/01,08:00
Alarm Time
Off, 09:00 On , Off
Date Time Stamp
Off On , Off
Auto Switch time
5s 5s,10s,30s,1min
Recording schedule
Off On , Off
Start Time : 12:00:00
Final Time: 12:11:00
Zoom
1.0 1.0 to 3.0
TV out format
PAL PAL,NTSC
Monitor Video Off Timeout
Off, 60s From 5s to 180s
Camera setting value
VOX setting
Off High, Middle, Low, Off
Lullaby
Off Off, Lull 1, Lull 2, Lull 3, Lull 4
Temperature setting
ºF ºF - ºC
Min 59ºF - Max 86ºF 50ºF - 122ºF
Alarm Off On/Off, 5s,10s,30s,1m (increments)
Volume
5 0-9
TX Power
High High, Low
Night Light
Off Off, On
AUDIO/VIDEO OUT
You can hear and see audio/video output on a TV or other AV device
directly from your DXR Touch monitor.
Simply connect the AV OUT Cord (included) to the AV OUT jack on the right side of the monitor
and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV,
DVR, or Camcorder, and select the appropriate input setting on that AV device.
The monitor screen will automatically turn o, signaling the unit is connected. Please refer to your
AV device manual for proper input selection and operation.
TROUBLESHOOTING
Problem Solution
Monitor will not turn on • Check AC/DC connection
• Conrm power outlet is working properly
• Charge Battery Pack
Monitor on but no picture • Conrm “Audio Only” mode is not selected
• Conrm “VOX” mode is OFF
• Conrm there are no obstructions in front of camera
• Conrm camera and monitor are paired properly
Camera will not turn on • Check AC/DC connection
• Conrm power outlet is working properly
Battery does not recharge • Check AC/DC connection.
• Check battery pack connection in the monitor.
• Conrm power outlet is working properly
• Conrm batteries are placed correctly in monitor
Connection is lost • Conrm monitor and camera are ON.
• Conrm AC/DC adapter is connected properly
• Conrm battery has suciant power.
• Place camera and monitor near each other and press
camera Pair button to relink camera and monitor.
• Reduce distance between camera and monitor.
• Remove or avoid other wireless products that may
be near camera or monitor.