User's Manual

16
17
INDIVIDUAL CAMERA and CONVENIENCE ICONS
Specic small icons are created for each paired camera at the top edge of the screen which relate
to that individual camera (except Battery Level, which is for the monitor only). To use them...
just observe or touch one of the following Individual Camera icons to either...
A... view current Camera Number, or change to the next camera you want to view
B... view current VOX level, or change VOX sound sensitivity level for that camera
C... view Lullaby status, change the Lullaby selection, or turn o Lullabys from that camera
D... add Zoom/Pan/ Tilt controls over the scene to manipulate the image from that camera
NOTE: Other individual camera icons appear for informational purposes, such as Room
Temperature, Switching Mode and Signal Strength, and when in Quad Mode, each
camera screen shown will also display the Signal Strength of that particular camera.
Each paired camera scene also displays Convenience Icons (shown along the bottom of the screen)
so you can either view the current Date/Time Stamp or...
touch and bypass the Main Menu to...
1... instantly adjust Volume controls for that camera
2... instantly access the Play Video/View Photo control panel
3... instantly Record Video from that camera...with just one touch!
Battery Level
(monitor)
Room
Temperature
Switching
Mode (On)
Signal
Strength
direct to
RECORD
direct to
PLAY
direct to
VOLUME
DATE/TIME STAMP
Year/Month/Day
Hour/Minute/Second
Camera
Number
A
VOX
Level
B
Lullaby
Status
C
Zoom /
Pan/Tilt
D
1 2 3
WEBCAM USE
DATA/FILE TRANSFERS
To view a larger version of the monitor screen on your PC* screen...
Note: Using this feature allows viewing only on the computer. Once USB Connection
is established the monitor screen is turned o and all features and buttons (with the
exception of the ESC Button) will not be functional.
1. set the USB Output on the monitor to the Webcam icon (refer to page 13)
2. using the USB Cord (included), connect the monitor to an available USB port on your PC*
3. wait for your computer to automatically recognize and install the appropriate drivers and you
receive a Successful Installation message.
4. once you have installed the device driver, your MobiCam® DXR Touch can be utilized as a wireless
webcam.
5. once the picture from the monitor is displayed on your computer screen, pressing the ESC Button on
the monitor toggles between Single and Quad View modes.
The DXR Touch can be used in conjunction with Skype®, Windows Messenger®, Google Talk® and
Yahoo Messenger®. When utilizing Skype®, Windows Messenger®, Google Talk® or Yahoo
Messenger®, please refer to their documentation for techical support.
* The MobiCam® DXR Touch is only compatable with Windows® PCs.
To transfer photo and video les from the monitor to your PC* ...
Note: Using this feature allows viewing only on the computer. Once USB Connection
is established the monitor screen is turned o and all features and buttons (with the
exception of the ESC Button) will not be functional.
1. set the USB Output on the monitor to the USB Connection icon (refer to page 13)
2. using the USB Cord (included), connect the monitor to an available USB port on your PC*
3. wait for your computer to automatically recognize and show the outside Memory Device.
4. you may then move or copy les from the SD Card (not included) as you normally would with
any such storage device (provided one is in the monitor and has data stored on it)
* The MobiCam® DXR Touch is only compatable with Windows® PCs.
IMPORTANT: Use ONLY a ngertip or other NON-SHARP object to select touch screen
options. Using sharp objects can damage the screen and void the warranty.