70208 Complete Operating Instructions IMPORTANT: Keep instructions for future reference.
TABLE OF CONTENTS Introduction 1 Radio Interferece Parameters 1 Package Contents 2 Monitor/Receiver 2 Camera/Transmitter 3 To Start Charging/Powering On 4 Locking the Screen 4 Set to Another Language 4 Pairing Camera and Monitor 5 Main Menu 6 Touch Navigation Volume/Display 7 Lullabys 7 Night Light 7 Record 8 Play 9 Quad and Channel View 10 VOX (Voice Activation) 10 Settings Monitor Settings 11-14 Camera Settings 15 P
INTRODUCTION Congratulations on the purchase of this MobiCam® DXR Touch Monitoring System, which incorporates the latest advanced technology. To fully maximize and benefit from this product’s avanced features we hightly recommend you review these instructions. This 2.4 GHz Digital monitor enables you to transmit picture and sound signals cordlessly, which is ideal for many situations suchs as monitoring a baby, young children or the elderly or used as office or warehouse monitoring system.
PACKAGE CONTENTS • 1 Monitor/Receiver • 2 AC/DC Adaptors 5V 800mAh • 1 Attachable Strap Mount • 1 Camera/Transmitter • 1 Li-Ion Rechargeable Battery (for monitor only) • 1 Door/Drawer Attachable Hook • 1 Wall Anchor Mount with Screw • 1 USB to Mini USB Data Cord • 1 AV-Out Cable • 1 User Manual MONITOR Power ON LED Indicator ON/OFF Button 2-Way Talk Speaker Retractable Antenna Escape/Menu Button 2-Way Talk Button AV Output Battery Compartment SD Card Slot PAIR Button Lock Screen Butt
CAMERA Camera Lens Retractable Antenna Night Vision IR LEDs Focus Ring (Note: See Addendum on page 21 for focusing instructions) PAIR Button ON / OFF Button Power ON LED Indicator Night Light DC Power Input Battery Compartment Strap Mount (underneath) Microphone 2-Way Talk / Lullaby Speaker Ridge-Grip Surface Stand Camera / Transmitter Unit features: PAIR Button LED for Power ON / Pairing (flashes) Microphone & Speaker DC Input (AC/DC adaptor included) Night Vision Temperature Sensor and Alarm VOX (
TO START A. Plug one of the AC/DC adapters (they are interchangeable) into the monitor and allow it to charge the Monitor Battery for at least 5-1/2 hours. B. Plug the other AC/DC adapter into the camera. Turn the Camera On by holding the ON/OFF Button down for several seconds. The green “Power On” Indicator lights when powered up. C. Turn the Monitor On by holding its ON/OFF Button down for several seconds.
PAIRING: The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac- tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separately) you need to pair each following this sequence: NOTE: Before pairing be sure the camera and monitor are both turned on and both are within 10 feet of each other. 1. Power On the Monitor and Camera 2.
MAIN MENU ... touch the ESC Button to open the Main Menu on screen IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. Touch the appropriate icon to access all Settings and Options.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... VOLUME / DISPLAY ... to Do This ... touch – or + icons to adjust... Monitor Volume Screen Contrast Screen Brightness select a Camera... LULLABYS select one of four Lullabys and/or... deactivate all Lullabys... adjust Lullaby Volume select Night Light icon for the camera you wish to control in order to...
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... touch one of four functions... RECORD Photo goes to camera view and you can take a photo of the scene by touching this Still Camera icon NOTE: All recording functions require an SD memory card with available space (max 32 Gb) to be in the SD card slot on the monitor.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... touch to select one of two options... PLAY Video or Picture select Video or Picture select a folder for the Date of the Recording (year/month/day) select a Video or Picture File to Play or View as you view a Recorded Video file the screen will also show...
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... choose from these options... QUAD / CHANNEL Single Camera View select a Camera icon (1- 4, which will be shown in color and active if paired)to be your constant channel if choosing Single Camera View NOTE: All cameras must be Paired to the monitor for viewing access. (Refer to Quad View Pairing on page 5.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... Monitor Setting SETTINGS on the Setting Screen, simply touch the System Setting icon (at the top) to access monitor functions... From the Monitor Setting list... select Date/Time touch any value, then touch the arrows to adjust value up or down press OK to save changes From the Monitor Setting list...
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... SETTINGS (cont.) ... to Do This ... Monitor Setting (cont.) From the Monitor Setting list... select TV Out Format choose either PAL or NTSC video format (US standard is NTSC) touch OK to set From the Monitor Setting list... select Recording Schedule touch any value and then touch the up and down arrows to adjust time to activate press On (or OFF to deactivate) From the Monitor Setting list...
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... SETTINGS (cont.) ... to Do This ... Monitor Setting (cont.) From the Monitor Setting list... touch Video Off Timeout touch the timer icon to choose between non-active (X) or active (no X) Timeout Mode if active, touch the – or + icons to set the limit at which time the video will automatically Timeout (turn off) From the Monitor Setting list...
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... Monitor Setting (cont.) SETTINGS (cont.) From the Monitor Setting list... NOTE: Though shown here for reference, this function to be used ONLY for Updating System Firmware, to be downloaded and put onto an SD card, in order to be installed using this option. Specific instructions will be provided to registered users regarding any new firmware.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... Camera Settings SETTINGS (cont.) on the Setting Screen, simply touch the Camera icon (on the bottom line) for the one you wish to control the settings for... NOTE: Only Paired camera icons will show in color and be active for touch control. From the Camera Setting screen...
INDIVIDUAL CAMERA and CONVENIENCE ICONS IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. Specific small icons are created for each paired camera at the top edge of the screen which relate to that individual camera (except Battery Level, which is for the monitor only). To use them... just observe or touch one of the following Individual Camera icons to either... A...
WEBCAM USE To view a larger version of the monitor screen on your PC* screen... Note: Using this feature allows viewing only on the computer. Once USB Connection is established the monitor screen is turned off and all features and buttons (with the exception of the ESC Button) will not be functional. 1. set the USB Output on the monitor to the Webcam icon (refer to page 13) 2. using the USB Cord (included), connect the monitor to an available USB port on your PC* 3.
AUDIO/VIDEO OUT You can hear and see audio/video output on a TV or other AV device directly from your DXR Touch monitor. Simply connect the AV OUT Cord (included) to the AV OUT jack on the right side of the monitor and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV, DVR, or Camcorder, and select the appropriate input setting on that AV device. The monitor screen will automatically turn off, signaling the unit is connected.
FACTORY DEFAULT SETTINGS Item Default value Range Volume 5 0-9 Contrast 5 0-9 Brightness 5 0-9 Date & Time 2011/09/01,08:00 Alarm Time Off, 09:00 On , Off Date Time Stamp Off On , Off Auto Switch time 5s 5s,10s,30s,1min Recording schedule Off On , Off Monitor setting value Start Time : 12:00:00 Final Time: 12:11:00 Zoom 1.0 1.0 to 3.
BATTERY REPLACEMENT Monitor Battery (included) Li-Ion 3,7V 1200 mAh Camera Battery (not included, sold separately, Mobi part # 70216) Li-Ion 3,7V 1500 mAh PRODUCT SAFETY This product is not intended to be used as a medical monitor and its use should not replace adult supervision. CAUTION • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or serious injury. Do not operate any product with a damaged cord or plug.
PROPER DISPOSAL If you eventually dispose of the DXR Touch Monitor, Camera, Batteries, or AC Adapters, do so in accordance with current federal, state and local regulations. As a consumer, you may be obligated by law to recycle used batteries. Do not mix products bearing the WEEE symbol (crossed out trash bin icon) with your general household waste. For the correct collection and treatment of these products take them to the collection points designated by your local authority.
Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free 877.662.4462 Be sure to register this product on the Mobi website to receive firmware updates. www.getmobi.com Mobi, MobiCam, and DXR Touch are registered trademarks of Mobi Technologies, Inc. SD is a trademark of SD Association. Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger® are trademarks of their respective companies. © 2013 Mobi Technologies, Inc.
