Model #70061 Additional Camera USER’S MANUAL
TABLE OF CONTENTS INTRODUCTION PACKAGE CONTENT FEATURES & COMPONENTS SAFETY TIPS INSTALLATION & SET UP CAMERA OPERATION & INSTALLATION POWER ON/OFF CHANNEL SELECTION VOICE ACTIVATION (VOX) AUTOMATIC INFRARED NIGIT VISION PROBLEMS & SOLUTIONS FCC REGULATION LIMITED WARRANTY 1 2 2 3 4 6 7 7 7 7 7 8 9 10
INTRODUCTION Thank you for purchasing the Additional Camera for the MobiCam AV Wireless Audio/Video Monitoring System. The 900 MHz MobiCam AV, incorporates the latest in advanced technology enabling you to transmit picture and sound wirelessly. We highly recommend you read the entire Instruction Manual before use.
MONITOR UNIT FEATURES & COMPONENTS (Monitor sold separately but shown as reference) 1 1. TFT LCD Display 2. Channel Indicator LEDs 2 3. Channel Selection Switch 4. Speaker 3 4 5. Automatic Channel Scan Indicator 5 6. Power On/Off Indicator 10 7 8 12 9 6 14 7. Power On/Off Switch & Volume Control 8. LCD On/Off Switch 1 10 9. DC Jack 8 3 11. Brightness Controls (+)(-) 4 12. Battery Door 13. Audio/Video Output 11 7 2 10. Belt Clip 12 9 13 5 6 14 14.
SAFETY TIPS For proper setup and use, please read all instructions Please keep this manual for future reference. • This Product is not intended to be used as a medical monitor and its use should not replace adult supervision • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. • Never use transmitter and receiver near water (i.e. bathtub, sink, etc.
• Always remember that you are using public airways when using your monitor. • Use only a dry cotton cloth to keep the Camera and Monitor units free of dust. Do not use a dampened cloth, water, or liquid cleaner of any kind. • Always remove batteries from the Camera and Monitor and unplug the AC adaptors from wall outlets during long periods of non-use. • Replace only with the same or equivalent type.
INSTALLATION & SET UP Installing Batteries Your MobiCam AV can be powered by either using the supplied AC power adaptors or batteries. Using Batteries: a) Remove the battery door (12, 26) at the bottom/ back of each unit by loosening the child-safe screw (14, 25) and sliding the cover downward to release. b) Both units use 1.5 volt AA size batteries. Always use batteries of the same brand and age (alkaline recommended). Insert 4 AA batteries into the camera and 6 AA batteries into the monitor.
CAMERA OPERTATION & INSTALLATION Power ON/OFF Use the Power ON/OFF sliding switch to turn ON/OFF the unit (see #21 on page 3). Channel Selection Press the Channel Selection Switch (fig. 17) on the Camera to choose which channel you want the unit to transmit on. The channel indicator LED (fig. 16) will illuminate which channel the Camera is set to (A or B). Make sure to set the additional camera to a different channel than the first camera.
PROBLEMS & SOLUTIONS Problem Solution Poor reception • Battery Levels (check Led indicator: Full Power - Green; Low Power Orange) • The camera may not be set to Camera Mode. • Wrong Channel (Please note the monitor will return to Channel A automatically after power off ) Only Black & White picture displayed • Camera has switched to “Infrared Night Version” mode.
FCC REGULATION These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
LIMITED WARRANTY Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair.
