Instruction Manual

TROUBLESHOOTING
Problem Soluon
No Image
• Monitor or Camera has not been turned on.
• Check AC/DC connecon
• Conrm power outlet is working properly.
• Baery is low (check Led indicator: Full Power
Green; Low Power - Red)
• Wrong Channel (Please note the monitor will
return to Channel 1 automacally aer power
o)
• VOX mode is on, See Page 11
Only Sound is
Funconing
• LCD screen is O, See Page 10
• Low Power (Check LED indicator: Full Power
Green; Low Power – Red)
Only Black & White
picture displayed
• Camera may have switched to “Infrared Night
Vision Mode,” See Page 12
Baery does not
recharge
• AC/DC adaptor has not been connected.
• Non-rechargeable baery has been used,
See Page 9
Camera will not link • Unit has not been switched on.
• AC/DC adaptor has not been connected.
• Check to make sure you are making contact
with the link buon.
• Check to make sure you are selecng the
correct channel
Screen turns on and o • “VOX” mode is selected, when there is no noise
detected by the camera the screen and audio
turn o, See page 11
• Baeries are low, LED indicator will be red
Channels Keep Switching • Conrm status of scan mode, See page 10
13