User manual
16 17
Switch on alarm standby
Switch on the alarm standby with another mobile phone
Alarm standby is
activated
Write the SMS instruction
Confirmation of the SMS
instruction
e.g.:
e.g.:
set auto: Protection against vehicle theft
Vibration-sensor and locating activated.
set home: Protection against burglary
Motion-sensor activated.
set baby: Baby phone
Motion- and acoustic- sensor/
microphone activated.
examples:
Test Auto test monitoring vehicles
(no alarm calls, on the Mobi-Click an
alarm tone is heard)
Reset Home monitoring rooms switched off
Set Baby Baby phone switched on
Mobi-Click Compact can be set per SMS
instructions with every normal mobile phone.
Therefore you should be able to write and send
SMS messages on your mobile phone, then you
are also able to serve Mobi-Click. All settings of
Mobi-Click are made by a simple principle:
Write a SMS on your mobile phone.
Send this SMS to the Mobi-Click Compact
SMS instructions consist of 2 words:
1. word: what do I want to do?
Set = switch on
Reset = switch off
Test = test
2. word: determine situation or sensors
Auto = vehicle monitoring
Home = room monitoring
Baby = baby phone
Always space bar between the
words.
Use capital / small letters or both.
Every new instruction deletes the
old one!
With the instruction set alarm
you can activate the Mobi-Click in
alarm mode.
Alarm is ready!
Activate Compact as alarm system On your own mobile phone
Send the SMS instruction
to Mobi-Click Compact
Set auto
Set home
Set baby
e.g.:
As easy as a SMS… What is the meaning of the SMS?
You receive short
message (SMS)
on your mobile phone
+
Activate as alarm
system (page 11)
+
31.03.2003 10:11
COMPACT 42
Command:
SET AUTO
Message:
Command OK
> End of Report










