User manual

PIN
At first: change the PIN-code!
As Mobi-Click Compact has only 3 buttons and a ON/OFF power button some settings have to be done on a second "normal"
mobile phone at the first use.
These settings have to be done just once!
Changing of the PIN-code
For the use of Mobi-Click Compact you also need a SIM-card which is like the SIM-cards you need for other mobile phones.
It does not matter which SIM-card you choose, a prepaid-card or a SIM-card with subscription with an operator. Put the SIM-
card, which you are going to use for Mobi-Click Compact later, in a "normal" mobile phone first.
Every SIM-card has a PIN-code. Since Mobi-Click utilises it own PIN system to guard against unauthorised access by SMS.
Therefore the original PIN-code of the SIM card must be changed (see your mobile phone handbook for changing PIN
instructions). For changing PIN you can use any mobile telephone.
Place the SIM card intended for use in the Mobi-Click into any mobile phone. Using the mobile phone’s menu, navigate to the
changing PIN code option (see your mobile phone handbook for changing PIN instruction) and change the PIN-code as
follows:
new PIN-Code: 1513.
In case of any problems read the instructions of your operator or the instructions of your mobile phone manufacturer.
After changing the PIN-code of your SIM-card, remove the SIM-card from your mobile phone and place it into Mobi-Click
Compact. Open the small cover at the bottom of Mobi-Click Compact and place the SIM-card into the SIM caddy. Carefully
replace the cover.
Ready to start!

Put the new SIM-card into the
"normal" mobile phone

SIM-
card
Place SIM-card with the changed
PIN into Mobi-Click Compact
SIM-
card



Enter the original PIN-code
code
Change the PIN-code
(as per page 6)
Take the SIM-card out
of the mobile phone again

Bottom
Compact
6 7
ATTENTION!
Mobi-Click Compact works only when you delete all messages you have in the "inbox" of your SIM-card.