User manual

Test Text
How can I test if the text is correct?
As per page 35 different SMS text can be assigned to different sensors. In order to test please follow
he instructions below:
Send one of the following SMS to Mobi-Click to test the associated sensor:
36
Set E-mail
Individual SMS-instructions
37
How can I use the notification by e-mail?
Action
Set Email aaa
DescriptionInstruction
Save e-mail address (aaa = address, till 23 signs)
Reset Email
Notification by e-mail deactivated
Set SMS *bbb
Notification by e-mail activated (*bbb = SC-number, till 8 signs)
You can also receive notification by e-mail. In addition you need an e-mail receiver to be informed in the case of
emergency. This is useful if, for example, your daughter is to be informed, however she is in the office all day so a
message is more suitable by e-mail, since she may not use her mobile phone during the day, or does not have her
own one.
This instruction can be deactivated simply with the instruction "Reset Email". In order to determine whether the e-mail
address of the receiver was stored correctly, you send the instruction "Test Text" to Mobi-Click, and you receive a reply,
in which the stored e-mail address is indicated.
You can change this e-mail address also at any time, by again sending a SMS with the instruction "Set Email aaa" and
"Set SMS *bbb" to Mobi-Click Compact. The old stored e-mail address is automatically overwritten.
Attention: The asterisk before the service centre number (SC number) must be always set!
You can get the service centre number from your provider.
Test Text
Acknowledgement to the indicated e-mail address
Instruction Action
Test
Test Text
The alarm SMS text reply and the e-mail address will be sent.
Test Text1
Text2
Text3
The alarm SMS text reply will be sent.
The area and the vibra SMS text reply will be sent.
The move and the voice SMS text reply will be sent.
Test
Text