User manual

32 33
The instruction "Hear Tel2" or "Hear Tel3" is useful if, for example, your fix net telephone does not have the
possibility of writing a SMS but you want to be called back on the fix net nevertheless.
Protection of the private sphere is in the constitution of
many countries. It should not and is not allowed to abuse
Mobi-Click for unauthorized monitoring purposes!
e.g.
Instruction Add-on
Hear
Hear Tel2
Mobi-Click calls back the pre-programmed telephone alarm number 2
Hear Tel3
Mobi-Click calls back the pre-programmed telephone alarm number 3
The instruction "Hear" causes a soundless call from Mobi-Click to you after
you have received your SMS. Now you can listen in the room or place
without being detected. This is useful if you, for example, use Mobi-Click as
a baby phone and you want to control if everything is OK.
Hear
Eavesdrop in? Yes, but pay attention...!
With this function Mobi-Click can be protected against outside access. The PIN-code consists of the word "PIN" and a code.
The code is always 4-digit and cannot contain any signs, but just digits (e.g. "1234").
IMPORTANT:
If you have saved your own Mobi-Click text responses, then all instructions which you transmit to Mobi-Click must have the
same text and PIN-code at the end, e.g. "set auto pin 1234". Without the code the instruction will not be fulfilled. If you
forgot to attach the PIN-code or attached a false PIN, you get a message with "Access denied!". (To save costs, Mobi-Click
sends you this message only once).
Action Instruction
Set code
Designation
1234
Description
write and save PIN-code
Reset code pin 1234
switch off PIN-code temporarily
Set Code / PIN
PIN-Code – How to protect against outside access?
ATTENTION!
Lost PIN-Code? What to do?
It is possible to do a general reset to factory default settings when you start the Mobi-Click Compact in alarm mode
(see page 11). This will also reset the PIN-Code.
After switching to alarm mode, you will hear 5 peeps, after which you must press and hold the blue button until you hear a
triple tone. Afterwards all settings, including the PIN-Code will be reset to factory default settings.
Action
Mobi-Click calls your mobile phone back