SDS

ManualsBrandsMMR ManualsCleaningPro 32 oz. Instant Mold/Mildew Stain Remover and 2 oz. Concentrate (Makes 1 gal.) Mold/Mildew Disinfectant

FILE NO.:

MSDS DATE: 02/05/18

PAGE 1 OF 5

SAFETY DATA SHEET

Mold Stain Remover

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

SYNONYMS:

PRODUCT CODES:

MANUFACTURER:

MMR Mold Stain Remover

None

Bad Axe Products, LLC

DIVISION:

ADDRESS: 966 Lambrecht Rd

Frankfort, IL 60423

EMERGENCY PHONE: INT. 1-800-424-9300 Chemtrec. (680702)

USA 1-800-424-9300 Chemtrec. (690702)

OTHER CALLS:

1-815-277-5100

FAX PHONE: 1-815-277-5217

CHEMICAL NAME: NA

CHEMICAL FAMILY: Sodium Hypochlorite

CHEMICAL FORMULA: NaClO

SECTION 2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:

OSHA Hazards:

Combustible Liquid

Target Organ:

Skin, Eyes, Nose

GHS Classification

Skin Irrit. 2 H315

Eye Dam. 1 H318

Aquatic Acute 2 H401

GHS Label elements, including precautionary statements

Signal word:

Danger

Hazard statement(s): H315 – Causes skin irritation

H318

– Causes serious eye dama

H401

– Toxic to aquatic life

Harmful if swallowed

Causes severe skin burns

Precautionary statement(s)

P264 - Wash exposed skin thoroughly after handling

P273 - Avoid release to the environment

P280 - Wear protective gloves, protective clothing, eye protection, face protection

P302+P352 - IF ON SKIN: Wash with plenty of soap and water

P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing

P310 - Immediately call a POISON CENTER or doctor/physician

P332+P313 - If skin irritation occurs: Get medical advice/attention

P362 - Take off contaminated clothing

P501 - Dispose of contents/container to comply with local, state and federal regulations

HMIS Classification

Health hazard: 3

Chronic Health Hazard: ND

Flammability: 0

Physical hazards: 1

NFPA Rating

Health hazard: 3

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET FILE NO.: MSDS DATE: 02/05/18 Mold Stain Remover SECTION 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT CODES: MMR Mold Stain Remover None MANUFACTURER: DIVISION: ADDRESS: Bad Axe Products, LLC 966 Lambrecht Rd Frankfort, IL 60423 EMERGENCY PHONE: INT. 1-800-424-9300 Chemtrec. (680702) USA 1-800-424-9300 Chemtrec.
PAGE 2
SAFETY DATA SHEET FILE NO.: MSDS DATE: 02/05/18 Mold Stain Remover Fire: 0 Reactivity Hazard: 1 Potential Health Effects Inhalation: May be harmful if inhaled. May cause respiratory tract irritation. Skin: May be harmful if absorbed through skin. May cause skin irritation. Eyes: Causes serious eye damage. Ingestion: May be harmful if swallowed. CARCINOGENICITY OSHA: (NO) ACGIH: (NO) NTP: (NO) IARC: (NO) SECTION 3.
PAGE 3
SAFETY DATA SHEET FILE NO.: MSDS DATE: 02/05/18 Mold Stain Remover PRECAUTIONS FOR SAFE HANDLING: Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. Wash exposed skin thoroughly after handling.
PAGE 4
SAFETY DATA SHEET FILE NO.: MSDS DATE: 02/05/18 Mold Stain Remover Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions Reacts violently with acids. May react violently with reducing agents. Contact with acids liberates toxic gas. Conditions to avoid Incompatible materials. Direct sunlight. Extremely high or low temperatures. Materials to avoid Strong reducing agents. Water. Zinc. Metals. Aluminium. Ammonia. Strong acids.
PAGE 5
SAFETY DATA SHEET FILE NO.: MSDS DATE: 02/05/18 Mold Stain Remover SECTION 14. TRANSPORTATION INFORMATION DOT PSN Code: HNV DOT Proper Shipping Name: HYPOCHLORITE SOLUTIONS DOT Class: 8 DOT Pack Group: III DOT Label: CORROSIVE IMO PSN Code: NTF IMO Proper Shipping Name: SODIUM HYPOCHLORITE, SOLUTION SECTION 15.