User Manual

USB Interface with Serial Emulation Interface Instruction manual / User Guide
MMF POS Date of Revision 5-1-2010 Doc. Serial Emulation Inst ructi on Manual
P/N:
531-9209-00
STEP 5
Under ‘Por t Pro perties’ choose the Port
which Devic e Manag er has assigne d as the
Virtual COM Port. In this example , Por t 4
was the COM Port assigne d.
Then, click on Save/Exit
STEP 6
To test drawer - Clic k on
“Initialize OPOS Drawer 1”
then, click on “Open OPOS
Drawer 1” (See Figure 1.4
the follow ing message will be
displayed:
STEP 7
Click “O K” to the above message and the n
manually clo s e the c ash drawer.
When the drawer is completely closed the
follo w i ng message will be di splaye d :
STEP 8
Click on “Un-initialize OPOS Drawer 1” and the tes t is complete . Repeat only if necessary.