Owner's manual

MMF CASH DRAWER

Advantage Series

™

Under Counter Brackets Mounting Instructions

Mounting Steps:

STEP 1 Pre-drill six (6) holes for the #12 wood screws under surface of

counter where unit will be installed. Each bracket takes three

holes 4” apart. Distance in between the bracket depends on the

Cash Drawer’s width, please measure before drilling. CAUTION:

Do not drill through counter.

STEP 2 Secure the two (2) under counter brackets (ITEM A) against

bottom surface of counter by using six (6) No.12 -5/8” Pan Head

Phillips Wood Screws (ITEM B) and six (6) Washers, 1/4 SAE Zinc

Plated Flat (ITEM D) .

STEP 3 Slide cash drawer unit over brackets and align the four (4) holes

under cash drawer with the four holes of the brackets to secure

bottom of the cash drawer to the brackets.

STEP 4 Secure cash drawer unit to brackets using the four (4) #6 -3/8”

Type AB Pan Head Screws (ITEM E) and four (4) Washers, (.156

I.D. x .312 O.D. x .035) (ITEM C).

KIT PART# 226199UCBK1004

SPECS:

• Color: Black

• Material: Steel

• Length: 12.00”

• Height: 5.146”

4(ITEM E) SCREW, #6 - 3/8", TYPE AB PAN HEAD

6(ITEM D) WASHER, 1/4 SAE ZINC PLTD FLAT

4(ITEM C) WASHER, (.156 I.D. x .312 O.D. x .035)

(ITEM B) WOOD SCREW, #12 - 5/8" PAN HEAD

PHILLIPS

(ITEM A) UNDERCOUNTER MOUNTING

BRACKET

ImageQtyKit Includes:

For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfcashdrawer.com

For full set of instruction on the Advantange Series visit http://www.mmfcashdrawer.com.

P/N: 531917100

4”

Checkout Counter

(A)

(B & D)

Distance in between the bracket depends on the Cash Drawer’s width.

CASH DRAWER COMPANY,

WHEELING, ILLINOIS