Service manual

4. Troubleshooting
4-10
(2) Generator field winding wire
Disconnect the wires leading to the rotary
rectifier, then measure the resistance between
the wires.
(3) Exciter armature winding wires
Disconnect the wires leading to the rotary
rectifier, and measure the resistance between
the wires.
(4) Exciter field winding wire
Disconnect 9P connector in the control panel,
and measure the resistance at the connector on
the generator side.
6-15-2
6-15-3
J terminal- between K terminal.
SG06020
J
K