User's Manual

EN 7
6 Troubleshooting
Warning
• Never remove the casing of the speaker.
To keep the warranty valid, never try to
repair the speaker yourself.
If you encounter problems when using
this speaker, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips
website (www.philips.com/support).
When you contact Philips, ensure that
the speaker is nearby and the model
number and serial number are available.
General
No power
• Make sure the speaker is fully
charged.
• Make sure the USB socket of the
speaker is properly connected.
• As a power-saving feature, the
speaker turns o automatically
15 minutes after no audio signal
is received.
No sound
• Adjust the volume on this speaker.
• Adjust the volume on the connected
device.
• Make sure that your Bluetooth
device is within the operational
range.
No response from the speaker
• Restart the speaker.
5 Product
information
Note
• Product information is subject to change
without prior notice.
General information
USB port 5V 3A
Built-in Lithium battery 7.4V, 5000mAh
Dimensions (W x H x D)
104 x 104 x 280 mm
Operation Ambient
IP protection class
0 ℃~45 ℃
IP67
Weight (main unit) 1896 g
Amplier
Output power (RMS) 40 W
Frequency response 60 Hz - 20 KHz
Signal to noise ratio > 75dB
Speakers
Impedance 4 Ω
Maximum input power 15 W
Size
Bluetooth
Bluetooth version 5.2
Frequency range 2402 - 2480 MHz
Maximum
transmition power
Compatible
Bluetooth proles
HFP V1.7
Bluetooth range up to 20 m
2 x 71 mm
*The IP67 rating means the speaker
driver is dust tight and can be
submerged for up to 30 minutes
at a depth of up to 1 m.
＜10dBm