User's Manual

EN6
5 Product
information
Note
• Product information is subject to change
without prior notice.
General information
USB port 5V 2A
Built-in Lithium battery 3.7V, 4400mhA
Dimensions (W x H x D)
70 x 70 x 169 mm
Operation Ambient
IP protection class
0 ℃~45 ℃
IP67
Weight (main unit) 492 g
Amplier
Output power 10 W
Frequency response 80 Hz - 20KHz
Signal to noise ratio > 75dB
Speakers
Impedance 4 Ω
Maximum input power 10W
Size
Bluetooth
Bluetooth version 5.2
Frequency range 2402 - 2480 MHz
Maximum
transmitionpower
6dBm
Compatible
Bluetoothproles
HFP V1.7
Bluetooth range up to 20m
44 x 80 mm
Pairing for stereo mode
Two identical wireless speakers
(Philips S4807) can pair with each other
for stereo sound.
Note
• Any speaker can be used as the primary
speaker.
• The speaker connected to a Bluetooth
device can only be used as the primary
speaker.
• Before stereo pairing, make sure that the
secondary speaker is under Bluetooth
pairing mode.
•
Keep a maximum distance of 20 meters
(66 feet) between the speaker and your
Bluetooth device.
• In stereo mode, the button operation on
the secondary speaker is as same as that
of the primary speaker.
3 Sec.
3 Sec.
1 Press to power on both speakers,
they will enter Bluetooth pairing mode
automatically. The speaker connected
to your Bluetooth device will be used
as the primary speaker.
2 On the primary speaker, press and
hold to enter stereo pairing mode
until the LED indicator blinks blue and
green alternately.
3 Press on either speaker. The
music will be played through both
speakers.
To exit the stereo mode, press and hold
the on either speaker.