TAS4807 User manual Register your product and get support at www.philips.
Contents 1 Important Safety 2 2 2 Your wireless speaker Introduction What's in the box Overview of the clock radio 3 3 3 3 3 Get started Charge the built-in battery Turn on/off 4 4 4 4 Play from Bluetooth devices Play from Bluetooth devices Control playback Control phone call 5 5 5 5 5 Product information 6 6 Troubleshooting General Bluetooth 7 7 7 7 8 8 8 8 9 Notice Compliance Care of the environment FCC Statement Trademark notice EN 1
1 Important Safety Important safety instructions • Make sure that the power supply voltagecorresponds to the voltage on the back or the underside of the unit. • The speaker shall not be exposed to dripping or splashing. • Do not place any source of danger on thespeaker (e.g. liquid filled objects, lit candles). • Make sure that there is enough free space around the speaker for ventilation. • Please use the speaker safely in an environment with temperature between 0° and 45°.
2 Your wireless speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that philips.com/welcome. 1 • Turn the speaker on or off. 2 • Press and hold to enter Stereo pairing mode. 3 • Enter Bluetooth pairing mode. • Clear Bluetooth pairing information.
3 Get started Power off When the speaker is being charged, LED blinks red slowly. Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note • Fully charge the built-in battery before using. • When the speaker is turned on and the battery is low, the battery level LED indicator blinks Red slowly. Connect the USB-C socket on the speaker to an outlet (5V 2A) by using the provided USB cable.
4 Play from Bluetooth devices Play from Bluetooth devices With this speaker, you can enjoy audio from your Bluetooth device. • Make sure that the Bluetooth function is enabled on your device. • The maximum distance for pairing the speaker and your Bluetooth device is 20 meters (66 feet). • Keep away from any other electronic device that may cause interference. 2 3 • To disconnect a device, press and hold for 3 seconds until the LED indicator Blinks blue quickly.
Pairing for stereo mode Two identical wireless speakers (Philips S4807) can pair with each other for stereo sound. 5 Product information Note Note • Any speaker can be used as the primary speaker. • The speaker connected to a Bluetooth device can only be used as the primary speaker. • Before stereo pairing, make sure that the secondary speaker is under Bluetooth pairing mode. • Keep a maximum distance of 20 meters (66 feet) between the speaker and your Bluetooth device.
6 Troubleshooting Warning • Never remove the casing of the speaker. To keep the warranty valid, never try to repair the speaker yourself. If you encounter problems when using this speaker, check the following points before requesting service. If the problem remains unsolved, go to the Philips website (www.philips.com/welcome). When you contact Philips,ensure that the speaker is nearby and the model number and serial number are available. General No power • Make sure the speaker is fully charged.
7 Notice Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void theuser's authority to operate the equipment. Compliance Hereby,TP Vision Europe B.V. declares and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negativeconsequences for the environment and human health.
FCC Statement The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received,including interference that may cause undesired operation CANICES-3(B)/NMB-3(B) Warning:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Trademark notice The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are thoseof their respective owners.
Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. TAS4807_00_UM_V1.
