User's Manual

Play from Bluetooth
enabled devices
7
EN
5 Bluetooth
Note
• The eective operation range between this unit and
your Bluetooth enabled device is approximately 10
meters (33 feet).
• Any obstacle between this unit and your Bluetooth
enabled device can reduce the operational range.
1
Press SOURCE repeatedly to select
Bluetooth mode.
2
When [Philips R7606] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
If you fail to search for “
Philips R7606”
or cannot pair with this unit, press and
hold for more than 2 seconds to enter
pairing mode.
When successfully connected,
[BT] and
will turn steady and you will hear a
pairing sound.
[BT] and will ash.
Philips R7606
3
Play audio on the connected device.
To disconnect the Bluetooth enabled device,
turn o Bluetooth on your device.
Audio streams from your Bluetooth
enabled device to this unit.
TUN
6 Other features
Set alarm time
Set alarm
Note
• You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
for more than 2 seconds to set alarm time.
AL1 or AL2
2
Press HR to set hour and MIN to set
to conrm.minute, then press AL1
or AL2
Tip
• The unit exits alarm setting mode when being idle for
15 seconds.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
If the alarm timer is activated, the alarm
indicator turns on.
If the alarm timer is deactivated, the alarm
indicator turns o.
The alarm repeats ringing for the next day.
To stop the alarm, press the corresponding
AL1 or AL2.
Snooze the alarm
When the alarm sounds, press SNOOZE.
The alarm snoozes and repeats ringing 9
minutes later.
3 Press to select alarm type (daily,
once, weekdays, or weekends ), then press
AL1 or AL2 to conrm.
TUN
4 Press to set an alarm source (BT,
FM, or buzzer), then press AL1 or AL2
to conrm.
TUN
5 Press to set the volume level,
then press AL1 or AL2 to conrm.