User's Manual

14
Setup Menu
The unit allows you to congure advanced
settings to provide you with an even better
experience.
1 Press the (MENU) button on the
remote control to open the menu.
2 Select the content with / (Down / Up)
on the remote controller and press
(Enter) to conrm your selection.
3 Change the initial values for each of the
settings with the cursors
/ (Left / Right)
and press
(Enter) to conrm your
selection.
• To return to the previous screen, press ←
(Back).
• To exit the settings, press
(MENU) .
• If no button is pressed within 5 seconds,
the system will automatically exit the menu.
/ /
EQ
MUSIC, VOICE, MOVIE, SPORT, CUSTM
BASS bass + 5 ~ bass - 5
TREBLE treble +5 ~ treble - 5
AV SYNC AV00 ~ AV200
CH VOL... CTR +5 ~ CTR - 5
DIMMER DIM 03, DIM 02, DIM 01, DIM 00
EQ
Select Equalizer (EQ) Effect.
Several preset EQ modes are available:
MUSIC , VOICE, MOVIE, SPORT, CUSTM.
» By default, the EQ is set to MOVIE.
BASS/TREBLE
Adjust the Bass/Treble Level.
» bass + 5 ~ bass – 5
» treble +5 ~ treble –5
» By default, the Bass/Treble is set to 0.
AV SYNC
Set the Audio Delay.
• Video image processing, sometimes longer
than the time required to process the
audio signal. This is called “delayed.” Audio
Delay feature is designed to remedy this
delay.
• Set the audio delay, provided only for the
current playback mode. (As provided in
the HDMI ARC audio delay mode, the
delay mode is valid only for the HDMI
ARC).
» AV00 ~ AV200
» By default, the audio delay is set to 00.
Tips
•
The audio delay setting is only valid for digital audio
(eg HDMI 1, HDMI 2, HDMI ARC, OPTICAL).
In AUX / BT / USB mode, the audio delay has no effect.
CH VOL (CENTRE)
Adjust the Center Sound.
» CTR + 5 ~ CTR – 5
» By default, the center sound is set to 0.
DIMMER
Set display brightness.
» DIM 03, DIM 02, DIM 01, DIM 00
» By default, the dimmer is set to DIM 03.
Factory Reset
Reset device to default setting
1 Set is ON
2 Press and hold Vol+ and Vol- button for 8
secs.
» Display shows “RESET” for 5 secs