User's Manual

16 EN
Bluetooth Operation
Through Bluetooth, connect the
Soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then
on the device through your Soundbar
speakers.
What you need
· A Bluetooth device which supports
with Bluetooth version as 5.0 + EDR.
· The maximum operational range
between the Soundbar and a
Bluetooth device is approximately
10 meters (30 feet).
1 Press the button repeatedly on
the unit or press Pair/BT button on
the remote control to switch the
Soundbar to Bluetooth mode.
→ The BT indicator will blink.
2 On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7207 to start connection
(see the user manual of the
Bluetooth device on how to enable
Bluetooth).
→ During connection, the BT
indicator will blink.
3 Wait until you hear voice prompt
from the Soundbar.
→ If the successfully connected,
the BT indicator will light up
solidly.
4
on your Bluetooth device.
· During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
· If your Bluetooth device
remote control you can press
/ to skip to a track, or
press
to pause/resume play.
5 To exit Bluetooth, you can:
· Switch the unit to another
source.
· Disable the function from your
Bluetooth device. Or place your
Bluetooth device out of the
maximum operational range.
The Bluetooth device will be
disconnected from the unit after
the voice prompt.
· Press and hold the BT/Pair
button on the remote control or
the
button on the unit.
Tips
•
The music streaming may be interrupted by
obstacles between the device and Soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
• If you want to connect your Soundbar with
another Bluetooth device, press and hold
BT/Pair on the remote control to disconnect
the currently connected Bluetooth device.