User's Manual

14
4 Use your
Soundbar
This section helps you use the
Soundbar to play audio from connected
devices.
Before you start
· Make the necessary connections
described in the quick start guide
and the user manual.
· Switch the Soundbar to the correct
source for other devices.
Turn ON and OFF
·
the main socket, the unit will be
in STANDBY mode. The Standby
indicator will light up.
· Press the
button on the remote
control or on the main unit to switch
the main unit ON or OFF.
· Disconnect the main plug from the
main socket if you want to switch
Auto Standby
The unit automatically turns to Standby
mode after about 15 minutes if the TV
or the external unit is disconnected,
·
remove the mains plug from the
mains socket.
·
to save energy when not in use.
Select Source
1
Press the button repeatedly on
the unit or press the AUX, OPTICAL ,
HDMI ARC , Pair/BT , USB buttons
on the remote control to select the
desired mode.
The indicator light on the
Soundbar will show which mode
is currently in use.
Status LED State
AUX [AUX/USB] Solid white
USB [
AUX/USB] Blinking white
Standby [
Standby] Solid red
Pair/BT
• Connected
• Connection
[
BT] Solid white
[BT] Blinking white
OPTICAL [
OPTICAL] Solid white
HDMI ARC [
HDMI ARC] Solid white
Select Equalizer (EQ)
your video or music.
1
P
There are four EQ modes in our
soundbar, movie, Music, voice and
Stadium. press EQ key on RC, some
of the source LEDs shall ash at a rate
of 200ms-ON, 200ms-o (2.5Hz).
LEDs shall return to previous state
without action over 3sec. Default
mode is movie.
ress the EQ button on the remote
control to select your desired preset
• Movie (5 LEDs blink): Create a
surround listening experience. Ideal
for watching movies.
• Music (4 LEDs blink): Create two-
channel or multichannel stereo
sound. Ideal for listening to music.
• Voice (3 LEDs blink): Create sound
more clear and outstanding for
listening.