User's Manual

13EN
Connect to Power
• Before connecting the AC power
cord, ensure you have completed all
other connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1 Connect the mains cable to the AC~
socket of the unit and then into a
mains socket.
2 Connect the mains cable to the AC~
socket of the Subwoofer and then
into a mains socket.
* Power cord quantity and plug type
vary by regions.
Pair up with the Subwoofer
Automatic Pairing
Plug the Soundbar and the Subwoofer
into the mains sockets and then press on
the unit or remote control to switch the
unit to ON mode. The Subwoofer and
Soundbar will automatically pair.
Determine the status based on
the wireless Subwoofer indicator.
LED State Status
Fast blink Subwoofer in pairing mode
Constant on Connected / Pairing successful
Slow blink Connection / Pairing Failed
Tis
•
Do not press Pair button on the rear of the
Subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless Subwoofer
can be heard, manually pair up the
Subwoofer.
1 Unplug both power cable of subwoofer
and soundbar,
then plug them in again
after 3 minutes.
2 Press and hold the Pair button on the
rear of the Subwoofer for 5 seconds.
The Pair indicator on the
Subwoofer will rapidly blink.
3 Press on the soundbar or remote
control to switch the soundbar to
enter pairing mode automatically.
4
The P indicator on the Subwoofer air
will become solid in orange when
successful.
5 If the Pair indicator still keeps
blinking, repeat step 1-3.
Tips
•
The Subwoofer should be within 6 m of the
Soundbar in an open area (the closer the better).
• Remove any objects between the Subwoofer and
the Soundbar.
• If the wireless connection fails again, check if
interference from an electronic device) around
interferences and repeat the above procedures.
'PS&6
'PS6,
PS
'PS&6
'PS6,
PS
"$_