Soundbar 7000 Series TAB7207 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions Safety Care for your product Care of the environment Compliance Help and support 3 6 6 6 7 7 8 8 9 10 3 Connect 11 11 11 12 12 13 13 4 Use your Soundbar 14 14 14 14 15 16 17 17 Dolby Audio Connect to HDMI socket Connect to Optical socket Connect to AUX socket Connect to power Pair up with the subwoofer Turn ON and OFF Select âĽŏ½ēÿŶâľַ)ָ âŻâØŊ Adjust the volume Factory reset Bluetooth operation USB operation AUX / OPTICAL / HDMI ARC Operation 2 EN 18 6 T
1 Important safety instructions Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • • • • • • • • • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • • CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. Remove batteries if they are exhausted or if the remote control is not to be used for a long time. Batteries contain chemical substances, they should be disposed of properly. This is CLASS II apparatus with double insulation, and no protective earth provided.
• questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial this information on the back or bottom of your product.
2 Your Soundbar Congratulations on your purchase, and welcome to Philips! To fully ×âĚâžŊ from the support that philips ġŻâľł֤ľâöÿłŊâľ Ůġŏľ łġŏĚÞ×½ľ ½Ŋ www.philips.com/support. Main unit This section includes an overview of the main unit.
Connectors Wireless Subwoofer This section includes an overview of the connectors available on your soundbar. This section includes an overview of the Wireless subwoofer. 6 1 1 2 3 4 5 1 Audio in Audio input from, for example, an MP3 player (3.5mm jack). 2 USB • Connect to a USB storage device for audio media play. • Upgrade software of this product. 3 HDMI out (ARC) Socket Connect to the HDMI (ARC) input on the TV. 4 Optical in Connect to an optical audio output on the TV or a digital device.
Remote control 10 This section includes an overview of the remote control. 11 1 (Standby-On ) button • Switch the soundbar On or to standby. 2 EQ (Mode ) There are four EQ modes in our Soundbar,movie,music,voice,stadium. 3 HDMI ARC Switch your source to HDMI ARC connection. BT / Pair 4 Switch to Bluetooth mode. paired list not empty, reconnect to the last device (connectable, 10s timed out and entered pairing mode) Press 3s disconnect all BT devices and enter pairing mode.
Replace the remote control battery • Slide to remove the battery compartment cover, insert 2 AAA batteries (1.5V) with correct polarity, then slide the battery compartment cover back into position. • • Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment. • Do not place the remote control on a wet object. Do not place the remote control under direct sunlight or near sources of excessive heat.
Wall mount 1 Note • Improper wall mounting may result in accident, • • • • ~50mm/2.0" 731mm / 28.78” injury or damage. If you have any query, contact Consumer Care in your country. Before wall mounting, make sure the wall can support the weight of your soundbar. Before wall mounting , you need not remove the rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be žxed back.
3 Connect This section helps you connect your soundbar to a TV and other devices, and then set it up. For information about the basic connections of your soundbar and accessories, see the quick start guide. Note • The Dolby Audio-Dolby Digital Plus experience is only available when the soundbar is connected to the HDMI-ARC source via a HDMI cable above 1.4 .
2 Using a High Speed HDMI cable, connect the HDMI ARC connector on your Soundbar to the HDMI ARC connector on the TV. Connect to AUX Socket HDMI out (eARC) • HDMI CEC: the CEC function of HDMI supports and the following, remote control through event system audio control (standby required) Optical Use a 3.5mm to 3.5mm audio cable TV to connect the TV’s headphone TV unit.
Connect to Power LED State Status Fast blink Subwoofer in pairing mode • Constant on Connected / Pairing successful Slow blink Connection / Pairing Failed • Before connecting the AC power cord, ensure you have completed all other connections. Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. 1 Connect the mains cable to the AC~ socket of the unit and then into a mains socket.
4 Use your Soundbar Select Source 1 This section helps you use the Soundbar to play audio from connected devices. Before you start · Make the necessary connections described in the quick start guide and the user manual. · Switch the Soundbar to the correct source for other devices. Turn ON and OFF · the main socket, the unit will be in STANDBY mode. The Standby indicator will light up. · Press the button on the remote control or on the main unit to switch the main unit ON or OFF.
• Stadium (2 LEDs blink): Create an atmosphere as if watching a sports game in a stadium. AUX/USB BT Standby OPT HDMI ARC Movie Vol- Adjust the Treble and Bass Mute Volume 2 Press - BASS + Press -Bass + on the remote control to increase/decrease Subwoofer’s volume. Music AUX/USB BT Standby OPT HDMI ARC bass +5 Voice Stadium bass -5 Adjust Maxthe Volume Vol+ When adjusting the volume of the soundbar and subwoofer, the status indicator will increase / decrease the amount of light.
· During play, if a call is coming, music play is paused. Play resumes when the call ends. · If your Bluetooth device Bluetooth Operation Through Bluetooth, connect the Soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then on the device through your Soundbar speakers. 5 What you need · A Bluetooth device which supports with Bluetooth version as 5.0 + EDR.
USB Operation Enjoy audio on a USB storage device, AUX / OPTICAL / HDMI ARC Operation memory, etc. Ensure that the unit is connected to the TV or audio device. 1 1 2 3 Insert the USB device. Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode. [AUX/USB] LED indicator blinks white.
5 Product speci cations Note • to change without notice. Bluetooth A2DP, AVRCP Bluetooth version Subwoofer Power Supply 100-240 V~ 50-60 H 100 W RMS@≤10% THD；320W MAX. Output Power Power Consumption 45 W Standby Power Consumption < 0.5 W Frequency Response 40Hz - 150Hz Impedance 4Ω Dimensions (W x H x D) 400 x 300 x 150 mm 4.7 kg V 5.0 Bluetooth frequency band Weight 2400 ~ 2483 MHz Operating Temperature 0°C - 45°C Transmitter power ≤ 5dBm 2.
6 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the main unit do not work. • Disconnect form the power supply for a few minutes,then connect again. No power • Ensure that the AC cord is properly connected.
• • The device is not correctly connected. Connect the device correctly. The soundbar is already connected with another Bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the soundbar. unit on my Bluetooth device • Ensure the Bluetooth function is activated on your Bluetooth device.
Trademarks: The terms HDMI, HDMI High-Dežnition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license.
Sp www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility Hong Kong Holding Limited. is the warrantor in relation to this product. UM_TAB7207_00_EN_20220106_V0.
