Parts List/Tune Up Info

FCC ID: 2AR2STAA7607LC
IC: 24589-TAA7607LC
Tune-up procedure
Each device is individually calibrated during manufacturing. Measurement is performed in a
full calibrated setup using spectrum analyzer and power meter.
Measurement procedure is outlined below:
1. Set the device to operational voltage and on a predefined band class and channel.
2. The BT specific RF characteristics were measured by spectrum analyzer and power
meter.
The user has no possibility to change these settings.
Tune up procedure shall be over the power range or at specific operating power levels.
1. It must provide an operational voltage to turn on the device and on one certain channel in
service mode by means of company proprietary software.
2. The maximum gains of each individual device are adjusted until the target value met.
BT
Band Mode Target Power (dBm) Tolerance (dB)
2.4GHz
BT_GFSK
8.0
(-1.5,+0.5)
BT_π/4-DQPSK
5.5
(-1.5,+0.5)
BT_8-DPSK
5.5
(-1.5,+0.5)
BT_LE
7.0
(-1.5,+0.5)
BT_2LE
4.0
(-1.5,+0.5)

Summary of content (1 pages)