Quick Start Guide

Getting Started Guide | MMBNetworks.com/BRD21

Thread joiner credentials into the target Thread network’s on or o mesh

commissioner.

4. On the rear of the BRD21, connect the USB-C- Power Adapter. Wait for the Status

LED to turn Solid Green.

5. Press the ‘Thread ON/OFF’ button. The ‘Thread Network’ LED will ﬂash.

6. The TME’s ‘Thread Network’ LED will light solid when joining is complete.

7. Verify TME device has been commissioned onto the network via the Edge device.

8. Go to https://mmbnetworks.com/ to learn more about the BRD21 and how to

connect to the Siemens Edge Device.

Rev 0.1 MMB Networks 2022 • BRD21 QSG