User's Manual

9
Verify mTape is recognized by your system (continued...)
2) Under “System Information”, verify that the Ultrium-HH tape drive inside of mTape is displayed
under the “SAS” setting…
If the Ultrium-HH is not displayed, make sure
you have powered on mTape and the green
Ready Light is on.
If you have issues with mTape being
recognized by your system, please
contact
[e-mail].
Note: Once mTape is powered on and you
attach mTape to your computer, it takes
approximately 20 seconds for the tape drive
to show up in “SAS” setting.