D A I G C F I E B G F I E G F H E I G H F E
A×1 B×1 C×1 step 1 A B H H D×1 E×4 H×2 I×4 F×4 G×4 J×36 K×1 L×4 M×8 J J×8
step 2 step 3 When installing part D, first lift the right lock rod to the proper position,then insert the lock shaft into the oblong hole of the lock rod, and finally push and fix the part D. When installing part C, it must be inserted from above.
step 4 step 5 K E K F Wall Install the drawer bend the buckle at the bottom position.
step 7 step 6 J Bend the buckle. Install the screws. G Ensure that the bottom piece of Part G totally insert into the drawer.
step 8 step 9 I I I Pull out the two sliding rails at thearrow position of the cabinet completely. Use the left and right slide rails to fix the assembled drawer as shown ,then press the drawer to stuck it completely.
step 10 Repeat steps 5,6,7,8 and 9 to install the remaining three drawers.
