Instruction manual

--------------------------------------------------------------------------------------------------------------------

This manual may not be copied or reproduced in any way without the express written consent of

MLCS Woodworking.

Assembly and Adjustments

Function Description

This tool can be used as a router/edge trimmer or as cut-out tool, when different accessories are

installed.

Caution! Do not use this tool for drilling holes. It is not intended to be used as a drill.

ON/OFF switch:

The power switch is located near the top of the motor housing. The power is turned on by

sliding the power switch upward. Sliding the power switch downward interrupts the power and

turns the tool off.

WARNING! Never use the tool if its switch cannot turn it on or off smoothly.

WARNING! Never use tool without the motor installed in the freehand sole plate, pistol

grip handle or plunging/tilting router base.

HIGH / LOW SPEED switch

The Marvel 42 has two-speed settings. There is a sliding switch on the top of the motor housing

to switch between the two speeds. Changing speeds should only be done with the power

switched off.