Operation Manual

Protect setup
If you set this option at YES, you will be asked to enter PIN code when you enter this Parental
setup menu.
Change setup pin
If you want to change the existing PIN code for Parental setup, you can do so using this menu.
You need to enter a new PIN code twice.
Protect services
You need to set this option at YES, if you want to lock certain channels with PIN code.
This option will be activated only if you set Protect services at YES. Here there are two options:
- White list: This option is used to block all channels except those
channels in the parental control list.
- Black list: This option is used to block only those channels included in the parental control list.
[ : MENU > Setup > CI > Common Interface]
To be able to watch CAS channels, you need to have a proper
CAM and a Smartcard. XP1000 is integrated with a Common
Interface slot and two Smartcard slots.
If you have inserted CAM, you can check the information of
the inserted CAM, through this menu as below:
[ : MENU > Setup > Parental Control]
If you want to prevent certain channels from being accessed
by others, you can do so using this menu.
1 Go to Parental Control menu by pressing MENU > Setup >
Parental Control.
2 Set the parental control option at YES using LEFT/RIGHT
key. The menu will change as below.
5.2.3 Checking CAM
5.2.4 Parental Control
24