MK Battery Specs

8AGC2-DEKA
SPECIFICATIONS
Nominal Voltage (V) 6V
Capacity at C/100 220Ah
Capacity at C/20 190Ah
Weight 70 lbs. (32 kg)
Plate Alloy Lead Calcium
Posts Forged Terminals & Bushings
Container/Cover Polypropylene
Operating Temperature Range
-40°F (-40°C) - 140°F (60°C)
For Charging Parameters please refer to
www.mkbattery.com
Click on Technical Data, then on Photovoltaic Charging
Parameters in the PV/Solar section
Vent Self-sealing
Terminal U (SAE/STUD)
Rated UN2794 - Wet, Filled with Acid
Made in the U.S.A. by East Penn Manufacturing Co., Inc.
Distributed by:
Valve-Regulated, Absorbed Glass Mat Technology
MK Battery
1631 South Sinclair Street ● Anaheim, California 92806
Toll Free: 800-372-9253 ● Fax: [phone] ● E-mail: [e-mail]
DIMENSIONS
Inches (mm)
Length 10.25 (260 mm)
Width 7.09 (180 mm)
Height 10.88 (276 mm)
All data subject to change without notice. No part of this document may be copied or reproduced, electronically or mechanically, without written permission from the company. ©2011 MK Battery
Cycle Chart applies to all MK AGM batteries (except 8AGC2-DEKA cycle chart x 2)