Owner's manual

MK-101 Pro24 JCS MAINTENANCE

(A)

Increase cooling ow by releas-

ing the Flow Adjusting Clamp.

(B)

Reduce cooling ow by

Pressing down on the Flow

Adjusting Clamp.

If ow to the diamond blade requires adjustment, perform the following actions.

Flow Adjustment

Blade Dressing

NOTE:

Like most cutting instruments, a diamond blade performs best when it is dressed. Over time and use,

diamonds on the outer edge of the blade will become smoothed or “glazed” over. This will reduce

grinding efciency and may cause the blade to “wander” or bend giving the illusion of an alignment

problem. When this occurs, the blade will need to be dressed. The diamond blade can be dressed us-

ing the MK Dressing Stick (part number 152972) and by following the steps below.

(A)

Setup the MK101 for operation

(See Setup, Adjustment

and Operation).

(B)

Set the Adjustable Cutting

Guide to cut a 1/16-strip.

(C)

Position the Dressing Stick. Cut

the Dressing Stick 7 or 8

times to dress the Blade.