Operation Manual

ManualsBrandsMJX ManualsMiscellaneousC4010 FPV

FPV software download and installation

#C4010 7.4V installation ( for helicopter):

1.Insert the TF memory card

into the camera.

2.The camera should be

fastened to the interface at

the bottom of the model,

fix the camera by screwing

clockwise.

4.Fasten the antenna bracket

to the oblique tube of the

helicopter, then, install the

antenna to the antenna bracket.

3.Insert the white camera plug

to the interface of the camera,

and then,Insert the plug at the

other end of the camera wire

to the camera interface of the

model.

5.Insert the antenna bracket

into interface of the foot

stand and lock the screws.

6.Install the antenna to the

antenna bracket.

1.Insert the TF memory card into

the camera.

2.The camera should be fastened

to the interface at the bottom

of the model, fix the camera

by screwing clockwise.

3.Insert the camera wire plug

to the camera interface.

4.Insert the plug at the other

end of the camera wire to the

camera interface of the model.

Contents

Install software:

1.Open the software

“MJX FPV”.

3.Image is showing

on the screen.

2.Click the

button.

#C4010 7.4V installation (for quad-copter):

For 3.7V

helicopter

For 3.7V

quad-copter

For 7.4V

helicopter/

quad-copter

Instructions:

Tips:

Please make sure that the memory card has been installed at the card slot before the camera is

powered on;when the camera is powered on, please do not insert the mermory card or take out

the memory card.

For Android system, please visit our website www.mjxtoys.com to download the software “MJX FPV”.

For Apple IOS system, please go to the APP store to download the software “MJX FPV”.

Power on the model, the FPV indicator light (at the bottom of the

helicopter) is on and in green color, 15 seconds later, the green

light will turn into red light and flash. Then, enter into settings of

the smart phone, open WIFI, search “MJX FPV **** “and connect

it. After successful connection, exit settings. Open “MJX FPV”

software at the smart phone and click the logo“MONITOR”

to enter into the control interface to watch the real-time video.