Owners manual

Figure 5
Figure 6
Page
4
43
43
43
43
43
43
43
43
45
Figure 4
6 Thread a stud 9 halfway into each Leg 8.# ###
7 Attach legs 8 to Leg Blocks 6 using the stud 9 in Leg.,## #
.one washer 10 and one nut 11 for each leg Square##
..leg up with corner of cabinet and tighten See Figure 4
8 With the help of another adult flip table over onto legs.,.
9 Slide Center Beam 12 into slotin End Cabinet Panels 1.,##
,as shown in figure 5 and secure each end with one screw
,.14 one washer 15 and one dowel connector 16## #
.Beams should be flush with top of Cabinet Panels
10 Slide Cross Beams 13 into slots in Side Cabinet Panels.##
,,2 as shown in Figure 5 and one dowel connector#
..16 Beams should be flush with top of Cabinet Panels#
11 Secure two Screw Blocks 17 opposite one another in the.##
,corner of the Center Beam 12 and Cross Beam 13 as##
,shown in Figure 6 using four screws 7 for each Screw#
.Block
12 Repeat step 11 for other Cross Beam 13..#