Owners manual

Figure 1

Figure 2

Figure 3

1 Begin by opening all boxes and sort parts Slide the eight..

Dove Blocks 3 into the slots in the End Cabinet Panels 1 and##

().the Side Cabinet P 2 See Figure 1anels #

IMPORTANT Do Not drive Dove Blocks into grooves with!IMPORTANT Do Not drive Dove Blocks into grooves with!

., .a hammer If a block is too tight try it in a different groove., .a hammer If a block is too tight try it in a different groove

2 Attach End Cabinet Panels 1 and Side Cabinet Panels 2.####

with

Corner Posts 4 as shown in Figure 2 using four screws#

.:5 for each Corner Posts Note Bottom of Corner Posts#

.should be flush with bottom of Cabinet Panels

3 Set a Leg Block 6 in the corner of cabinet assembly on top.##

4 Attach Leg Bloock 6 to Dove Blocks 3 using four screws 7

SeeFigure3

## #

5 Repeat steps 3 and 4 for other three Leg Blocks 6..#

of Dove Blocks 3 See Figure 3 Attach Leg Block 6 to side..##

Cabinet Panel 2 and End Cabinet Panel 1 using two##

screws 7#

Page