Owners manual

10
For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
14. Attach two apron corners P10 to each end of apron ball return panel P9 with
the arrows facing up using screws H4 as shown in FIGURE 7.
15. Attach the assembled apron return panel P9 toboth apron side panels P7A
and P7B using screws H4. Attach the apron to the main cabinetP1 using
screws H3 as shown in FIGURE 7.
Figure 7
16. Bend the short return board P11 by hand and insert into the groves of both
apron side panels P7A and P7B by sliding first in the direction noted by an
“X” as shown in FIGURE 8. Next slide the board in the direction noted by
the letter “Y” into the grove on the apron ball return panel P9.
17. Attach the short return board P11 using screws H6 as shown in FIGURE 8.
18. Position the metal brackets H7 as shown and tap down into place with a
hammer as shown in FIGURE 8.
Figure 8