Owner Manual

STEP 12:
19
©
2012 Escalade Sports
For Customer Service Call 1-866-556-2757
Attach P17 Ball Return Tray Board onto P16 Ball Return Support Board using H16 Bolts and H17 Washers
as shown in Figure 21.
Attach P17 Ball Return Tray Board onto P14 End Apron with Opening Ball Return Trim using H6 Screws
as shown in Figure 21. Tighten, but do not strip out H6 Screws.
PARTS REQUIRED:
4 pcs - H6 Screw 1 pc - P17 Ball Return Tray Board 1 pc - A3 Brush
4 pcs - H16 Bolt 2 pcs - A1 Cue Stick 1 set - A5 Billiard Ball
4 pcs - H17 Washer 1 pc - A2 Triangle 2 pcs - A6 Chalk
All Right Reserved.
Figure 21
H6
H17
P14
P17
A5
A3
A6
A1
A2
Note: Small wooden block on this upper side.
H16
Note: Small wooden block
on this upper side.