Owner Manual

15
©
2012 Escalade Sports
For Customer Service Call 1-866-556-2757
All Rights Reserved.
Figure 16B
H9
H10
P13
P12
P14
P12
STEP 8:
With the rail assembly face down, attach P12 Side Aprons using H9 Bolts with H10 Washers (see inset). Do not
tighten yet.
Next, attach previous assemblies P13 and P14 End Aprons flush against the bottom of the P10 End Top Rail and
align using threaded inserts on the underside of each rail. Attach P13 and P14 End Apron assembly using H9
Bolts with H10 Washers (see inset). Do not tighten yet.
Be sure each P15 Corner Post is flush with each P12 Side Apron, then attach using H11 Screws.
Tighten, but do not strip out H11 Screws.
Lastly, tighten all H9 Apron Bolts.
PARTS REQUIRED:
12 pcs - H9 Bolt 12 pcs - H11 Screw
12 pcs - H10 Washer 2 pcs - P12 Side Apron
H11
P10
P9
P15
P15
H9
H10