User Manual

C
M
Y
CM
MY
CY
CMY
K
vibe-watermark-bright.pdf 25/10/2010 17:41:48
3 Audio Configuration
1 Go to [File > Preferences > Audio].
C
M
Y
CM
MY
CY
CMY
K
config_audio_dj_le.pdf 14/01/2011 15:37:26
Audio Configuration Pane
2 Select your audio interface from the pull down menu.
3
Choose your desired sample rate and buffer size . You can start by using a sampling rate of 44.1 kHz
and a buffer size of 256 samples.
4 Select the inputs and outputs of the audio interface from the pull down menus.
5 Select your routing mode. If you are using an external mixer, select the routing mode External Mixer.
Here is a description of the different routing modes:
Simple Stereo The sum of the Master and Cue/Monitor signals are routed to outputs 1/2 on your audio interface.
Dual Stereo The Master signal is routed to outputs 1/2 and the Cue/Monitor signal is routed to outputs 3/4 on
your audio interface.
Split Mono The Master and Cue/Monitor signals are folded down to mono. The mono Master is routed to output
1 and the mono Cue/Monitor is routed to output 2 on your audio interface.
External Mixer Deck A direct out is routed to outputs 1/2 on your audio interface, and Deck B direct out is
routed to outputs 3/4. For audio interfaces with more than 4 outputs, the Cue/Monitor out is also routed
to outputs 5/6.
9 / 24