User Manual

C
M
Y
CM
MY
CY
CMY
K
vibe-watermark-bright.pdf 25/10/2010 17:41:48
10 Frequently Asked Questions
How do I update my software?
To download the latest version of your MixVibes software, you will need to be registered on the MixVibes Forum.
To register:
• Go to our forum.
• Click on “Register” on the “Board Index” sidebar.
• Read the terms and click on “I agree to the terms”.
• Fill out your profile with your user name, valid e-mail address, and password.
• IMPORTANT: You will need your software license key to complete the registration (written on the back of
your installation CD sleeve).
• You will receive an e-mail with an activation link to complete registration.
To download/install:
• Go to the Download Center.
• Select your version of MixVibes and find the latest update.
• Click the “download” button near the bottom of the page.
• Once the download is finished, extract the folder and run the EXE (PC) or DMG (MAC) file.
How do I recover my lost serial number?
We recommend keeping your serial number (which is printed on the back of the installation CD sleeve) by
registering on the forum, and entering it in the space provided. We’ll be able to recover it for you in case you lose
it.
How do I know the controller’s firmware version?
1 Make sure your controller is connected via USB to the computer.
2 Power the device OFF.
3 Press and hold the SHIFT and BASS_B buttons of the U-MIX CONTROL 2.
4 Power the device ON, keep holding the SHIFT and BASS_B buttons.
5 The firmware version is given by the lighted LEDs: Version X .Y
1 X (on the deck A): 1 (PITCH MODE), 2 (SELECT), 3 (LOCATOR1), 4 (LOCATOR2), 5 (LOCATOR3), 6
(VINYL), 7 (BEND-), 8 (BEND+), 9 (SYNC)
2 Y (on the deck B): 1 (PITCH MODE), 2 (SELECT), 3 (LOCATOR1), 4 (LOCATOR2), 5 (LOCATOR3), 6
(VINYL), 7 (BEND-), 8 (BEND+), 9 (SYNC)
6 Press SHIFT to go back to normal Mode.
21 / 24