User Manual

CMY

vibe-watermark-bright.pdf 25/10/2010 17:41:48

8 First Mix with CROSS DJ LE and U-MIX CONTROL 2

1 Load a track into the player A and the waveform will appear.

2 Start playback of the audio in the player.

3 You should now hear the music in your speakers: You can start mixing.

While the track on deck A is playing for the audience, press the Cue/Monitor button on deck B so that

you can pre-listen the track you will be preparing on deck B on your headphones while the audience

continues to listen to the track being played on deck A over the speakers (you need to use a 2-outputs

ASIO soundcard and the Cue/Monitor output needs to be conﬁgured in the audio preferences).

The two audio tracks are most likely not at the same tempo. You need to match the tempo of both tracks,

and synchronize one player with the other by:

•

adjusting the pitch (via the pitch fader and the pitchbend buttons or the jogwheel platter of the

U-MIX CONTROL 2). Use the Beat Matcher in the Head-Up Display as visual indicator.

CMJ

sync_and_HUD_dj.pdf 01/07/2009 16:31:13sync_and_HUD_dj.pdf 01/07/2009 16:31:13

Beat Matcher

•

using the Sync buttons to automatically perform those two tasks. Pressing the Sync button will

adjust the playback position to match the downbeat of the other player and match the tempo of

the other player.

Adjust the level using the Gain knob, which allows you to set the overall level to match that of the track

playing on the other deck.

To go from one track to another, move the crossfader from left to right, or use the channels faders on the

integrated mixer of the U-MIX CONTROL 2.

You can also change the channel equalization of the mixer to make the transition more smoothly between

the two tracks.

9 You can also use the effects and loops to highlight different parts of an audio track.

19 / 24