User Manual

C
M
Y
CM
MY
CY
CMY
K
vibe-watermark-bright.pdf 25/10/2010 17:41:48
1 Connections
1.4 Turntable/CD Player and External Mixer Setup
1 If you are using vinyl, plug the ground of your turntable to the ground lug on the U-MIX CONTROL PRO or
on your DJ mixer.
2 Connect the outputs of your decks (vinyl or CD) to the RCA inputs of your U-MIX CONTROL PRO plugging
the left deck into the inputs 1/2 and right deck into the inputs 3/4. Match the left channel (usually white)
with the white RCA sockets on the U-MIX CONTROL PRO, and right (usually red) with the red sockets.
3 If you are using turntables with phono outputs, set the U-MIX CONTROL PRO’s input selectors to ’Phono’.
If you are using turntables with line outputs or CD players, set the input selectors to ’Line’.
4 Connect the outputs of your U-MIX CONTROL PRO to the line inputs of your mixer. Connect the outputs
1/2 into a line input of your mixer and the outputs 3/4 into another one.
5 Connect your headphones to the external mixer’s headphone output and plug your sound system
(amplifier, powered speakers, or home stereo) to the external mixer’s main output.
6 If necessary, connect your microphone to the external mixer’s microphone input.
7 Connect the U-MIX CONTROL PRO to a free USB slot of your computer.
8 To turn on your U-MIX CONTROL PRO, set the rear panel selector to ’USB’.
9 After installing the software, set the CROSS DJ Audio preferences as described in the Audio Configuration
part of this manual: 3.1 on page 12.
REAR
LN PH
LN PH
DC IN
OUTPUT 3/4
POWER
INPUT 3/4 INPUT 1/2
9V
0.5A
TOUCH SENSOR
MIN MAX MIN MAX
OUTPUT 1/2
LR LR LR LR
USBOFF
C.F. CURVE
LEVEL
R L
USB
TURNTABLECD PLAYER
PHONO
LINE
LN PH
PHONO
LINE
LN PH
SOFTWARE
MIXVIBES
SPEAKERS
HEADPHONES
L R
MICROPHONE MIXER
Turntable/CD Player and external mixer setup
8 / 30