User Manual
Table Of Contents
C
M
Y
CM
MY
CY
CMY
K
vibe-watermark-bright.pdf 25/10/2010 17:41:48
3 Configuring CROSS DJ
3.1 Audio Configuration
1 Go to [File > Preferences > Audio]. Look at the figure on the following page to view the list.
2 Select "MixVibes ASIO U-MIX CONTROL PRO" from the pull down menu.
3
Choose your desired
sample rate
and
buffer size
. The default settings are 44.1kHz sample rate and
256 samples of buffer.
4 Select the inputs of the U-MIX CONTROL PRO from the pull down menus.
1 Stand alone setup: Select no input.
2
Turntables/CD Players and internal mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro
2
" for stereo input 1 and "
U-Mix Control Pro 3/U-Mix Control Pro 4
" for stereo input 2. Press the
SOURCE button of the controller (shift + headphones).
3
MP3 players (iPod
®
) and internal mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro 2
" for
stereo input 1 and "
U-Mix Control Pro 3/U-Mix Control Pro 4
" for stereo input 2. Press the SOURCE
button of the controller (shift + headphones).
4
Turntable/CD Player and external mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro 2
" for
stereo input 1 and "
U-Mix Control Pro 3/U-Mix Control Pro 4
" for stereo input 2. Press the SOURCE
button of the controller (shift + headphones).
5 Adjust the input gain depending on your input source to have enough level but without clipping.
6 Set the input level to Line. Make sure to follow the connection instructions: 1 on page 5.
7 Select the outputs of the U-MIX CONTROL PRO from the pull down menus.
1
Stand alone setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro 2
" for stereo output 1 (this out-
put is your system’s Master out) and "
U-Mix Control Pro 3/U-Mix Control Pro 4
" for stereo output 2
(this output is your system’s Cue/Monitor out).
2
Turntables/CD Players and internal mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro
2
" for stereo output 1 (this output is your system’s Master out) and "
U-Mix Control Pro 3/U-Mix
Control Pro 4" for stereo output 2 (this output is your system’s Cue/Monitor out).
3
MP3 players (iPod
®
) and internal mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro 2
" for
stereo output 1 (this output is your system’s Master out) and "
U-Mix Control Pro 3/U-Mix Control
Pro 4" for stereo output 2 (this output is your system’s Cue/Monitor out).
4
Turntable/CD Player and external mixer setup: Select "
U-Mix Control Pro 1/U-Mix Control Pro 2
"
for stereo output 1 (this output is linked to player 1) and "
U-Mix Control Pro 3/U-Mix Control Pro
4" for stereo output 2 (this output is linked to player 2).
8 Select your routing mode.
1 Stand alone setup: Select the routing mode Dual Stereo.
2 Turntables/CD Players and internal mixer setup: Select the routing mode Dual Stereo.
3 MP3 players (iPod®) and internal mixer setup: Select the routing mode Dual Stereo.
4 Turntable/CD Player and external mixer setup: Select the routing mode External Mixer.
12 / 30