Installation Sheet

www.strasserwood.com —
7
— [phone]
Illustration 1
Our mirror mounting system is easy to use, convenient, and
very secure.
Determine the desired location of the mirror and mark the
wall at top center of the mirror. (See Illustration 1.)
Measure “X” on your mirror. (See Illustration 2.)
Measure down “X” on your wall from the mark designating
mirror top center. Using a level, mark the positions of the
cleat mounting holes as shown in Illustration 3.
Screw cleat half B to the wall. If you are not familiar with
types of screws, load, or how to do this for your specific
application; ask at a home center.
1½" 1½"
X"
Illustration 3
1½" 1½"
X"
Back of
mirror frame
Illustration 2
Cleat half (A)
Cleat half (B)
Back of mirror
Cleat half (A)
attached to
mirror frame
Wall
Mirror
Cleat half (B)
screws to wall
INSTALLING MIRRORS ...........................................................................................................
Installation
Because our Newhalem mirror is large and heavy, you must be certain to attached the mounting cleats to wall studs. The mirror-side
cleat halves will likely need to be moved from their positions as shipped to mate with the wall-side halves.
Do not try to hang your Newhalem mirror using "molly," toggle or other drywall anchor devices. If you are not familiar with loads,
holding materials, proper fastening devices/techniques; consult a professional.
Installing Newhalem Mirrors .........................................................................................................
video
For your convenience, see our video
on this topic. Go to strasserwood.com and
click "installation and care" to find our videos.