Installation Sheet

www.strasserwood.com —
5
— [phone]
Top center of
medicine cabinet box
¾"
3½" (traditional lights)
2½" (LED lights)
varies with medicine
cabinet width
Illustration 1
Light globes fit over the porcelain
sockets and are held in place with
supplied metal nuts.
Crown
Light
housing
Electrical for Medicine Cabinets
You are either installing your medicine cabinet with lights or
without. If without, simply secure the crown to the top of the
cabinet.
If your medicine cabinet has lights, have your electrician
mount an electrical junction box so that power will be
available as indicated by the gray area in the illustration to
the right. (See illustration 1.)
Traditional lights: Attach the light housing to the medicine cabinet box securely with screws.
Slide the lighting fixture into the housing as shown and secure with the supplied angle pieces.
Traditional light fixtures use candelabra base bulbs available in a variety of
wattages and types. We recommend dimmable LED bulbs and your personal
taste will dictate the wattage you choose. You may also use standard incadescent
bulbs but do not exceed 40 watt rating. Be sure to use bulbs rated for “base up”
applications.
LED lighting: Attach the light housing to the medicine cabinet box securely with screws. Slide the threaded support posts of
the LED lightbar through the keyed square trim pieces and into the two holes in the light housing. Secure with supplied washers
and nuts. Power is supplied by the accompanying LED driver, which is wired into your installed switched junction box.
Your electrician can now connect the light fixture wiring at the electric junction box according to code. Then secure the crown
onto the light housing and you’re finished.
Installation