Installation Sheet
Table Of Contents
- ,H196503,
- GENERAL
- INSTALLATION
- STEP 1. Attach the mounting plate to the outlet box using the mounting screws.
- STEP 2. Fasten bare ground wire to ground wire from the wall outlet box (usually green or copper color) or connect ground wire to green screw on the mounting plate.
- STEP 3. Connect the neutral (white) fixture wire coming from the fixture base to neutral (usually white) outlet wire. Fasten both wires together with a plastic wire nut and tightly wrap the wire nut with electrical tape.
- STEP 4. Repeat the previous step with the hot (black wires). Make sure there are no exposed wires or strands that could cause a dangerous short circuit.
- FAILURE TO CONNECT THE APPROPRIATE WIRES CORRECTLY COULD RESULT IN SEROIUS INJURY OR DEATH !
- STEP 5. Carefully place wires into Outlet Box.
- STEP 6. Place the canopy with the fixture over the outlet box and fasten it by the screw collar.
- STEP 7. Install the lamps. The fixture is rated for 4 watt G9 LED.
- DO NOT EXCEED RECOMMENDED WATTAGE!
- STEP 8. Assemble the glass shade onto glass fitter.
- STEP 9. Restore power to the circuit at breaker or fuse box.
- DIMMING
- CLEANING
- ASSEMBLY AND MOUNTING DIAGRAM
- WIRE NUT/TAPING DIAGRAM
- H196 503 M41
- GENERALITÉ
- INSTALLATION
- PAS 3. Relier le fil neutre (blanc) venant de la base du dispositif au fil neutre (généralement blanc) de la boîte de dérivation. Relier les deux fils entre eux à l’aide d’un serre-câble en plastique et envelopper le serre-câble de ruban isolant bien ...
- RÈGLAGE D’INTENSITÉ
- NETTOYAGE
- SCHÉMA D’ASSEMBLAGE ET DE MONTAGE
- SCHÉMA DE BORNE DE RACCORDEMENT ET D’ENVELOPPAGE AVEC RUBAN ISOLANT
H196503 LOLA
FLUSH MOUNT
www.hudsonvalleylighting.com/mitzi | #mymitzi
SCHÉMA D’ASSEMBLAGE ET DE MONTAGE
SCHÉMA DE BORNE DE RACCORDEMENT ET D’ENVELOPPAGE AVEC RUBAN ISOLANT
RUBAN ISOLANT
CONNECTEUR APPROVÉ
(BORNE DE RACCORDEMENT)
SUPPORT DE VERRE
AMPOULE
BOÎTE DE
DÉRIVATION
PLAFOND
VIS DE MISE À TERRE
VIS DE MONTAGE
ABAT-JOUR
DE VERRE
À
PLAQUE DE MONTAGE
CACHE-PITON
TÉTON
BAGUE DE SERRAGE