Instructions / Assembly
Table Of Contents
- GENERAL
- INSTALLATION
- STEP 1. Remove the table lamp and parts from the Carton.
- STEP 2. Attach the harp onto the fixture.
- STEP 3. Attach the shade onto the harp.
- STEP 4. Install the Lamp. This fixture is rated for 60-watt type A lamp. DO NOT EXCEED RECOMMENDED WATTAGE
- STEP 5. Plug cord into a qualified socket of properly rated voltage.
- STEP 6. On/Off switch installed on cord.
- CLEANING
- ASSEMBLYANDMOUNTINGDIAGRAM
