Owner's manual

ManualsBrandsMittler Bros Machine & Tool ManualsWater equipment100-U

REV 2 April 5 2012

Hydraulic Tubing Notcher

Female Die

Assembly

Instructions

CAUTION: Read and Understand

These Instructions, Before Using

This Machine.

1-800-467-2464

10 Cooperative Way Wright City, MO 63390

P.O. Box 110 Foristell, MO 63348

1-636-745-7757 Fax 1-636-745-2874

www.mittlerbros.com

Summary of content (4 pages)

PAGE 1
Hydraulic Tubing Notcher Female Die Assembly Instructions CAUTION: Read and Understand These Instructions, Before Using This Machine. 1-800-467-2464 10 Cooperative Way Wright City, MO 63390 P.O. Box 110 Foristell, MO 63348 1-636-745-7757 Fax 1-636-745-2874 www.mittlerbros.
PAGE 2
WHEN NOTCHING 0.120” OR THICKER WALL THICKNESS PIPE OR TUBING Install Additional 0.005” Thick Brass Shim plus the standard 0.015” shim between female die & notcher frame = 0.020” total shim thickness See item 20 (Drwg. 100) or item 21 (Drwg. 100-U) #100-104 0.005” Thick Brass Shim - Qty.
PAGE 3
100 Hydraulic Tubing Notcher Set-Up Female Die (#7) to Main Frame (#3): 1. Insert 3/8-16 x 2-1/2” Socket Head Cap Screws (qty. 4) (#13) through low frame holes. 2. Install 0.015” thick Brass Shims (#20) over thread on SHCS – one per side. WHEN NOTCHING 0.120” OR THICKER WALL THICKNESS PIPE OR TUBING Install Additional 0.005” Thick Brass Shim plus the standard 0.015” shim between female die & notcher frame = 0.020” total shim thickness 3. Thread SHCS into Female Die (#7). 4. Tighten SHCS.
PAGE 4
100-U Heavy Duty Hydraulic Tubing Notcher Set-Up Female Die (#5) to Main Frame (#3): 1. Insert 3/8-16 x 2-1/2” Socket Head Cap Screws (qty. 4) (#12) through low frame holes. 2. Install 0.015” thick Brass Shims (#21) over thread on SHCS – one per side. WHEN NOTCHING 0.120” OR THICKER WALL THICKNESS PIPE OR TUBING Install Additional 0.005” Thick Brass Shim plus the standard 0.015” shim between female die & notcher frame = 0.020” total shim thickness 3. Thread SHCS into Female Die (#5). 4. Tighten SHCS.